PRO 1206i BUG DETECTOR
£549.99
The Pro1206i is a new class of a counter-surveillance device. Unlike all typical searching devices, it can detect modern hidden bugs which use such protocols as Bluetooth and Wi-Fi. Such bugs, especially Bluetooth types, are practically undetectable by common RF detectors due to their very low transmitted power and a special type of modulation. The Protect 1206i uses a separate channel with a high, [2.44/5 GHz] frequency pre-selector to detect and locate Bluetooth and Wi-Fi with a much higher sensitivity. The unit also then processes the demodulated signal in order to identify which protocol has been detected.
In addition, the unit can detect all types of conventional bugging devices [FM-modulated transmitters, digital transmitters, GSM-bugs, etc.]
price total 550 KRW
In stock
SKU: SKU#1206i
Description
PRO 1206i BUG DETECTOR
The Pro1206i is a new class of a counter-surveillance device. Unlike all typical searching devices, it can detect modern hidden bugs which use such protocols as Bluetooth and Wi-Fi. Such bugs, especially Bluetooth types, are practically undetectable by common RF detectors due to their very low transmitted power and a special type of modulation. The Protect 1206i uses a separate channel with a high, [2.44/5 GHz] frequency pre-selector to detect and locate Bluetooth and Wi-Fi with a much higher sensitivity. The unit also then processes the demodulated signal in order to identify which protocol has been detected.
In addition, the unit can detect all types of conventional bugging devices [FM-modulated transmitters, digital transmitters, GSM-bugs, etc.]
Type of device:
RF detector, 2 alternative channels
What does it detect?
Detects most RF signals (bugs) on all frequencies but with a relatively low sensitivity (at a close proximity). Wi-Fi / Bluetooth detected with a relatively high sensitivity (better distance)
What information about the signal does it give?
An RF detector informs that something is found, but does not inform what exactly. As such, some external signals may cause false detections (mobile phones in an adjacent premises, etc.)
Frequency range:
The device has 2 working modes ANT1 with an uninterrupted coverage of 50- 6000 MHz ANT2 with coverage of a span 2400 – 2480 MHz for Bluetooth/Wi-Fi only
Increased dynamic range:
The bargraph now rises quickly to weak signals and increases slowly to strong signals, thus giving the opportunity to locate the source.
New Attenuator:
The new algorithm widens the dynamic range even more, making the location procedure easier. Turn on the attenuator near a strong source when the bargraph lights fully and then it will drop and then increase further, therefore making it possible to locate more precisely.
Features:
• Extra high sensitivity to Bluetooth, Wi-Fi 2.4 GHz, Wi-Fi 5GHz and wireless video cameras
• The perfect tool for searching for digital and analogue transmitters of all types Frequency range
• Main antenna ANT1: 50-12000 MНz
• Auxiliary antenna ANT2: 2.4 – 2.48 GНz, 4.9 – 5.875 GНz16-segment bargraph indicator
• 4 working modes: silent, sound, vibration and mixed
• Correlation function discovers FM-transmitters by the presence of correlation (probing sound is used)
• 2 levels of sensitivity (attenuator)
• Long battery life
• Recognition of type of digital transmission: GSM, Bluetooth, Wi-Fi, DECT
• Durable metallic body
• Microprocessor controlled
Specification:
Frequency range
• Antenna 1: 50 – 12000 MHz
• Antenna 2, GHz: 2.4 – 2.48
4.9 – 5.875
• Power: Two ААА batteries (2xLR03)
• Dimensions : Without antennas, mm × mm × mm: 120×70×16with antennas, mm × mm × mm: 210×70×16
• Operation duration: Up to 20 hours
• Indications: Active antenna, Low battery, Mode, Identification, Attenuator, Secondary demodulation
Micro -Pointer Antenna :
• Frequency range: 2-12 GHz
• Type: Log-periodic array
• Model name: LPDA-12
• Dimensions: 53 x 84 x 9 mm
• Connector: SMA Male
Included Accessories:
• Rod (wide-band) antenna
• Micro-Pointer antenna
• Two AAA batteries
• User manual
Item Details
The Pro1206i is a new class of a counter-surveillance device. Unlike all typical searching devices, it can detect modern hidden bugs which use such protocols as Bluetooth and Wi-Fi. Such bugs, especially Bluetooth types, are practically undetectable by common RF detectors due to their very low transmitted power and a special type of modulation. The Protect 1206i uses a separate channel with a high, [2.44/5 GHz] frequency pre-selector to detect and locate Bluetooth and Wi-Fi with a much higher sensitivity. The unit also then processes the demodulated signal in order to identify which protocol has been detected.
In addition, the unit can detect all types of conventional bugging devices [FM-modulated transmitters, digital transmitters, GSM-bugs.
Counters Modern Spy Devices :
GSM/3G bugs, wired microphones, and body-worn recording devices like smartwatches or hidden with audio recording.
Portable Privacy Protection :
Small and discreet, making it ideal for use in offices, hotel rooms, vehicles, and outdoor settings where conversations need to be secured.
Enhances Security in Sensitive Environments:
Used by government officials, corporate executives, and journalists to protect against surveillance threats.
Wide Frequency Detection:
Covers frequencies from 50 MHz to 12 GHz, allowing detection of a broad spectrum of devices.
Dual Antenna System: Equipped with two antennas:
Antenna 1:
Detects frequencies between 50 MHz and 12 GHz.
Antenna 2:
Specialized for 2.4 – 2.48 GHz and 4.9 – 5.875 GHz, enhancing sensitivity to Bluetooth and Wi-Fi signals.
High Sensitivity:
Particularly effective in detecting Bluetooth, Wi-Fi (both 2.4 GHz and 5 GHz), and wireless video cameras.
16-Segment Bar Graph Indicator:
Provides a detailed visual representation of signal strength, aiding in precise source localization.
Multiple Alert Modes:
Offers sound, vibration, and mixed modes to suit various operational environments.
Correlation Function:
Utilizes a probing sound to identify FM transmitters by detecting correlated signals.
Adjustable Sensitivity:
Features a two-level attenuator to manage detection sensitivity, facilitating the pinpointing of strong signal sources.
Durable Construction:
Built with a robust metallic body, ensuring durability during field operations.
Frequency Range:
Antenna 1: 50 – 12,000 MHz
Antenna 2: 2.4 – 2.48 GHz and 4.9 – 5.875 GH
Operation Duration:
Up to 20 hours on a single set of batteries
Indicators:
Active antenna, low battery, mode, identification, attenuator, and secondary demodulation
Included Accessories:
• Rod (wide-band) antenna
• Micro-Pointer antenna
• Two AAA batteries
User manual
Questions & answers
What is the Protect 1206i?
The Protect 1206i is a device used to detect hidden surveillance equipment, such as microphones, cameras It also detects digital transmissions, such as wireless signals, which could indicate the presence of bugs or other hidden monitoring devices.
How does the Protect 1206i work?
The Protect 1206i works by scanning for electromagnetic signals, including radio frequency (RF) emissions, that are typically emitted by surveillance devices. It can detect analogue or digital transmission signals across various frequency ranges.
What types of devices can the Protect 1206i detect?
It can detect a variety of devices that emit electronic signals, including:
Hidden microphones (bugs)
Wireless cameras
Any other device transmitting a digital or analogue signal within its detection range.
Is the Protect 1206i portable?
Yes, the Protect 1206i is designed to be portable and easy to use. It is typically compact enough for personal or professional use in environments where you suspect surveillance might be occurring.
Does it work with batteries ?
Yes, Two ААА batteries (2xLR03)
How do I use the Protect 1206i to detect bugs?
Turn on the Protect 1206i
Scan the environment Slowly move the detector around the area, particularly in places where you suspect surveillance equipment might be hidden (such as behind furniture, in ceiling tiles, or inside electronic devices).
The detector will alert you to any signals it detects. These could be in the form of audible beeps or visual indicators.
Does the Protect 1206i detect wired surveillance devices?
The Protect 1206i is primarily designed to detect devices that transmit wireless signals. It may not be able to detect wired surveillance equipment (e.g., hidden cameras or microphones connected via cables), unless those devices are transmitting signals (e.g., through a wireless connection or using power lines).
Reviews
There are no reviews yet.